This aluminium plate side step is commonly known as the running board. This pair of bars are ideally fitted to a Mitsubishi Pajero/Shogun-Mark III-LWB model.

To be fixed beneath the vehicle via all appropriate brackets and nuts and bolts, these are an attractive replacement to your older existing pair.

Click the Photo to Enlarge

These slimline venti-shade visors are suited to the Mark III model Pajero/Shogun LWB. These attractive extra's serve as effective windbreaks/side view sun shields. They are black/smoke in colour but are transparent.

These are to be fitted using their sticky strip, however we strongly recommend using Poly Urethane Adhesive, available at D.I.Y stores to ensure a solidly secure and lasting fitting. We will happily supply this if requested, but at a cost. Included are clips for fitting.

Sold only in sets of 4.

Click the Photo to Enlarge

These snow chains are top quality, quick fitting, heavy duty, diamond pattern chains, made from special alloy steel with a new automatic tensioning mechanism. They can be fitted within minutes without moving your motor. They come complete with a galvanised tensioning chain on a tensioning system that avoids stopping to re-tension the chain. Reversible for longer life, They come complete with instructions, gloves and what we think is an even nicer little touch – A carrying bag, where they can be neatly stowed away in your boot, and not roll around, causing damage to your interior as is often the case with boxed sets. You’ll not find a brand new set anywhere else at any less than double the price we’re selling ours – guaranteed!

Click the Photo to Enlarge

These venti-shade visors are suited to the Mark II model Pajero/Shogun SWB. These attractive extra’s serve as effective windbreaks. They are black/smoke in colour but are transparent.

These are to be fitted using their sticky strip, however we strongly recommend using Poly Urethane Adhesive, available at D.I.Y stores to ensure a solidly secure and lasting fitting. We will happily supply this if requested, but at a cost. Included are clips for fitting.

Sold now in sets of 2, suitable for the SWB!!!!

This accessory features as part of our themed range and can be inexpensively combined with - LTC07 Black Headlight Covers, LTC29 Bonnet Bug Guard, and LTC37 Black Windscreen Visor (featured in Front Styling) and LTC30 Black Breaklight Covers (to be found in Rear Styling) - to achieve the stylish “blacked out” fashioning to the exterior of your vehicle that’s currently proving so popular today.

Click the Photo to Enlarge

Mitsubishi chrome imitation hub caps, suited to original wheels and most alloys. These are now available at a fiver a piece! One hub comes complete with a clips that attach the hub to the alloy and hold the cap in position. These clips are not to be mistaken for the cheaper, less reliable versions currently found on the market (and Ebay!)

This stainless steel side step is also known as the running bar. This pair of bars are ideally fitted to a Mitsubishi Pajero/Shogun-Mark v73 Model.

Fixed beneath the wheel arches via brackets, these are an attractive extra in co-ordination with exterior styling such as the Stainless Steel Bull Bar/A Bar.

Be prepared to take these to a garage to have them fitted if you aren't mechanically minded.

This Wheel Arch Extension Kit serves as a perfect replacement for existing narrow bodied arches. Suitable for the 92-97 models and those that have no wheel arches at all, to add that little extra flair. This 8 piece set comes complete with a rubber lining seal and screws in order to attach it to the body of your Pajero Mark II. Its made out of special ABS thermoplastic that will hold its shape under extreme conditions. With a Matte black finish it can be easily painted to match or accent your vehicle. Respray upon quotation.

Only suitable for the LWB.

These heavy-duty mud flaps are a colourful and slightly wider alternative to your existing set. They fasten securely with the fixing kit provided, to the underside of your wheel arches, sporting a stylish metal trim, that’s pulled taught by wire cables.

These sets are commonplace on our imported Pajero's and are proving to be very popular in the Far-East. Available only in sets of 4, these Mud Flaps are custom made fit the Mark II model Pajero and Shogun LWB/SWB. Please note Red Mud Flaps are prone to fading pink in time.

This pair of Black Wing Mirrors includes the appropriate electrical attachments making them an easily fitted, fully functioning replacement to your existing wing mirrors.

Suitable for the Mark II model Pajero/Shogun LWB/SWB.

Fitting costs £50.

Suitable for 6 nut alloys, this set of 4 spacers are to be fitted between your wheels and hubs to dramatically enhance the appearance of your Pajero/Shogun with regards to width, without affecting your vehicles performance.

Mitsubishi chrome imitation hub caps, suited to original wheels and most alloys. These come in sets of 4 and have clips that attach the hub to the alloys and hold the cap in position. These clips are not to be mistaken for the cheaper, less reliable versions currently found on the market (and Ebay!)

Sold only in Sets of 4.

This pair of chrome wing mirror units include all appropriate attachments, making them an easily fitted, replacement to you existing pair.

These are the perfect finishing touch, especially in replacement of black wing mirrors, to compliment the chrome fashioning to the exterior of your vehicle, that's proving so fashionable in 4x4 styling today.

Suitable for the Mark II model Pajero/Shogun, LWB/SWB.

The electrical connector block coming from these wing mirrors does not fit the one coming from the car. Previous customers have managed to get the electrical functions of the mirror working fully by fiddling with the wires. How complicated this is I do not know – if you have any further questions please contact us.

Be prepared to take these to a garage to have them fitted if you aren't mechanically minded.

This aluminium side step is commonly known as the running board. This pair of bars are ideally fitted to a Mitsubishi Pajero/Shogun-Mark II-LWB model.

To be fixed beneath the vehicle via all appropriate brackets and nuts and bolts, these are an attractive replacement to your older existing pair.

These durable Mud Flaps secure tight with the nuts and bolts that you’ll find securing your existing set, moulding perfectly to the shape of you wheel arch and improve the over-all appearance of your vehicle considerably.

Unfortunately separate sales aren't welcomed. This stylish set is very similar to the original's that were included as standard when in production and are compatible with the Mark II model Pajero and Shogun LWB/SWB.

This stunning pair of chrome wing mirror covers include all appropriate electrical attachments, making them an easily fitting enhancement to your existing pair.

These are the perfect finishing touch, especially in replacement of black wing mirrors, to compliment the chrome fashioning to the exterior of your vehicle, that's proving so fashionable in 4x4 styling today. They come complete with built in L.E.D lights (to wire up to side and breaklights) which are unique, enhancing safety whereby fellow drivers are concerned.

Suitable for the Mark III model Pajero/Shogun, LWB/SWB.

Click the Photo to Enlarge